Transforming EV Batteries to Second Life Battery Banks
Lithium Battery (LBS) Solution offers tailor-made lithium energy storage solutions using second life lithium batteries, removed from electric cars.
In our manufacturing process, we evaluate the condition of the batteries using controlled methods. When we recuperate those batteries, we re-use them to create a new system that is tailored to your needs. Our modules can be used in RV, working trucks, boats, UPS, ESS for off grid systems or any other energy reserve needed. We can configure your system at 12VDC,24VDC,48VDC or higher voltages if needed.
Re-manufacturing Process at-a-glance
Voltage & Resistance Verification
The lithium battery cells are then individually tested on multiples key factors including voltage, resistance, State of charge (SOC) and State of health (SOH).
Reconditioning & Clustering
Using high-tech remanufacturing and reconditioning line, our teams in Lithium Battery Solution regroup supplying battery cells into new configurations of Second Life Battery Banks. The scale of this clustering is depending on the project requirements according to vast number of SOC and SOH factors.
Battery Management System Integration & Delivery
It is crucial to constantly balance the lithium cells, to have alerts, alarms or shutdowns when there is a problem with one of the cells or the entire system. The BMS has to be able to communicate with the different charging and charging sources to have a safe and durable system. The lithium battery solution provides a pre-charge and heater relay to maintain its second life battery banks at the correct operating temperature.
Specifications of Second Life EV
Once completed, the solution includes :
- the cells themselves
- modules for grouped cells
- the BMS programmed by our teams for your system
- communication wiring harnesses
- bus bar
- pre-charge module
- mounting plates and nuts and bolts (Nissan only)
- electrical diagram for your system
You may also need one of these components that we or one of our partners can provide :
- charge and discharge protections
- battery racking
Plus a 3 year warranty included with the installation of a battery monitor.
TELSA EV SECOND LIFE BATTERY BANKS
TESLA Model S & X 2012-2020 Battery with Built-in BMS
- 90 kWh
- 24 V
- 215 Ah
Tesla EV 2nd Life Battery x1
Amp Hour: 215 AH
Weight: 25 kg
685 X 305 X 76 mm
Tesla EV 2nd Life Battery x2
Amp Hour: 430 AH
Weight: 50 kg
685 X 305 X 152 mm
Tesla EV 2nd Life Battery x3
Amp Hour: 645 AH
Weight: 75 kg
685 X 305 X 228 mm
Tesla EV 2nd Life Battery x4
Amp Hour: 860 AH
Weight: 100 kg
68.5 X 30.5 X 30.4 cm